Operating instructions

Pre-Season Preparation Chart

NOTE: It is highly recommended that the dealer perform the annual safety in-

spection and factory campaigns in addition to the pre-season preparation all at

the same time.

Before installing new spark plugs, it is suggested to burn the excess BOM-

BARDIER LUBE lubricant or equivalent by starting the engine using the old

spark plugs.

Safety item covered in the annual safety inspection.

OPERATIONS TO BE PERFORMED BY

Lubrication/corrosion protection OPERATOR

Battery condition/charging and reinstallation DEALER

Battery, starter connections and routing DEALER

Spark plug replacement OPERATOR

Jet pump oil inspection DEALER

Propulsion system inspection DEALER

Oil filter replacement DEALER

Fuel tank straps OPERATOR

Oil tank straps OPERATOR

Oil injection tank filling OPERATOR

Flame arrester inspection DEALER

Fuel filter replacement DEALER

Fuel line condition DEALER

Filler neck, fuel tank and fuel cap condition DEALER

Check valves, fasteners, fuel system pressurization DEALER

Throttle and choke cable inspection/adjustment DEALER

Oil injection pump adjustment and bleeding DEALER

Engine ignition timing DEALER

Carburetor adjustment DEALER

Steering system adjustment/inspection DEALER

Reverse cable adjustment DEALER

Inspection of bailer pick-ups DEALER

Inspection of cooling system hoses DEALER

Monitoring beeper DEALER

Digitally encoded security system DEALER

smo2000-001b.fm Page 55 Tuesday, May 4, 1999 1:20 PM