Operating instructions

61
NOTE: Some items are included in the PRE-OPERATION CHECKS and not nec-
essarily repeated in this chart.
D: Dealer
O: Operator
➀ Every 10 hours in salt water use.
➁ These items have to be initially checked after 25 hours. Thereafter, servicing
to be made as specified in this chart.
➂ Daily flushing in salt water or foul water use.
➃ Emission-related component.
➄ In salt water use.
➅ Replace at 150 hours.
➆ Replace at 250 hours.
➇ Check at 350 hours or 5 years.
ELECTRICAL
SYSTEM
Electrical connections condition and fastening
(ignition system, electrical box(es), starting system,
fuel injectors, etc.)
✔✔D
MPEM mounting brackets/fasteners ✔ D
Digitally Encoded Security System ✔✔D
Monitoring beeper ✔✔D
Battery condition and strap(s) ✔✔D
STEERING
SYSTEM
Inspection and cable adjustment ✔✔D
PROPULSION
SYSTEM
Drive shaft boot and spline condition ✔ ➁ D
Drive shaft protection hose inspection ✔ ➁ D
PTO flywheel and seal carrier lubrication
(if so equipped)
✔✔ O
Shifter system/cable adjustment ✔✔D
Jet pump reservoir oil level/oil condition Replace ✔ Replace D
Jet pump cover pusher inspection ✔ D
Impeller shaft seal replacement ➅ D
Impeller condition and impeller/wear ring clearance ✔ ➁ D
Water intake grate condition ✔ ➁ O
HULL AND
BODY
Bailer pick-ups, check for obstructions ✔✔O
Hull condition ✔✔O
DESCRIPTION
FREQUENCY
FIRST 10 HOURS EVERY 25 HOURS OR 3 MONTHS EVERY 50 HOURS OR 6 MONTHS EVERY 100 HOURS OR 1 YEAR TO BE PERFORMED BY
smo2003-005a.book Page 61 Friday, November 1, 2002 8:25 AM