SDS

SAFETY DATA SHEET Sea Foam Concentrated Fuel injector Cleaner

Revised: 4/18/2019 Page 4

8. Exposure Controls/Personal Protection

Exposure Limits

Guidelines by component

Mineral Oil (mists)

OSHA TWA: 5 mg/m3

ACGIH TWA: 5 mg/m3

TWA (Canada) 5 mg/m3

STEL (Canada) 10 mg/m3

EH40-MEL 5 mg/m3, 8 hours

NOHSC 5 mg/m3, 8 hours

1,2,4-trimethylbenzene (CAS # 95-63-6)

TWA: 25 ppm (ACGIH)

1,3,5-trimethylbenzene (CAS # 108-67-8)

TWA: 25 ppm (ACGIH)

Xylene (CAS # 1330-20-7)

TWA: 100 ppm (ACGIH)

STEL: 150 ppm (ACGIH)

TWA 100 ppm (US OSHA)

Cumene (CAS # 98-82-8)

TWA: 50 ppm (ACGIH)

1,2,3-trimethylbenzene (CAS # 526-73-8)

TWA: 25 ppm (ACGIH)

Other Exposure Limits: Not determined

Engineering Controls: Use in a well ventilated area. Where possible, cover sources

of oil sprays and mists with adsorbent cloth to minimize

exposure to mineral oil mists. Keep concentrations of mist

below exposure limits

Personal Protective Equipment

Respiratory: Where mineral oil mists are generated – use full face

respirator with organic vapor cartridge.

Eye: Wear safety glasses where splashing or splattering may

occur

Gloves: Use nitrile or neoprene gloves. If material is hot, use

appropriately insulated gloves.