Installation Sheet

Installation Instructions for

Holly Flush Mount

1.0

990C5_39493S-HOL

5539493S, 5639493S, 5739493S, 5839493S

CEILING

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliantNEC

junction boxes.

This product is safety listed for damp locations.

For a complete list of dimmers, visit out website at

www.seagulllighting.com.

This instruction shows a typical installation.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

7400 Linder Ave, Skokie, 160077IL

800.969.3347

www.generationlighting.com

The "Generation Lighting" graphic is a registered trademark of

Generation Lighting. Generation Lighting reserves the right to

change specifications for product improvements without notification.

SAVETHESE INSTRUCTIONS!

PAGE 1
Installation Instructions for 990C5_39493S-HOL Holly Flush Mount 5539493S, 5639493S, 5739493S, 5839493S 1.0 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. CEILING Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes.
PAGE 2
Install the Fixture 1A JUNCTION BOX 5 4 MOUNTING PLATE FIXTURE BASE 1 MOUNTING SCREW 6 DIFFUSER 1 Secure the mounting plate to the junction box leaving enough of the mounting screw exposed to mount the fixture later. 2 Connect the fixture to a suitable ground in accordance to local electrical codes. 3 Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.