Installation Guide

ManualsBrandsSea Gull Collection ManualsOutdoor PendantsSea Gull Lighting Medford Lakes 1 Light Outdoor Full Sized Pendant

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

Secure mounting bar (A) to outlet box with outlet box screws (not

supplied). Thread nut (B) on nipple (C) so that 3 threads are exposed

above nut (B). Thread nipple (C) into mounting bar (A) and secure

with nut (B). Thread screw collar (E) to nipple (C).

STEP 2:

sing 2 pairs of pliers or chain breaks, open one link of chain (S) and

connect it to the fixture loop (J) at the top of the fixture. Please be

sure to open chain link in an outward motion. Do not twist.

STEP 3:

Slide the screw collar ring (F) and canopy (G), in that order, over

chain (H). Open one link on the other end of the chain (H) and attach

it to the screw collar (E) which has been mounted to the ceiling

nipple (C).

BE SURE TO CLOSE ALL CHAIN LINKS COMPLETELY.

STEP 4:

INSTALLATION HC-1511

Lace wires up through chain (H) and pass wires through holes in

screw collar (E). We recommend lacing wire up through every other

link of chain (H).

STEP 5:

STEP 6:

A. Use a listed wire connector to connect the fixture hot wire (black

wire, or round and smooth tracer) to the supply hot wire.

B. Use a listed wire connector to connect the fixture common wire

(white wire, or square and rigid) to the supply common wire.

C. Gently try to remove the wires from the connector. If you can

remove the wires, carefully re-do the wiring connection.

GROUNDING INSTRUCTIONS: The green grounding screw (D) is to

be inserted into the hole with two raised dimples provided on the

mounting bar (A). Wrap the ground wire (M) from the fixture (if

supplied) and the ground wire from the outlet box (bare metal or

green insulated wire) around the green grounding screw (D) on the

mounting bar (A) if uninsulated wir

e is on the mounting bar (A),

connect the ground wire (M) from the fixture (if supplied) and the

outlet box to it using a small wire connector (not supplied).

NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER

SUPPL

Y WIRES.

STEP 7:

fter wires are connected, tuck them carefully inside outlet box.

Raise canopy (G) against ceiling and thread the screw collar ring (F)

to the screw collar (E).

Make sure no bare wires can be seen outside wire connectors.

nstall lamps (not supplied).

FINAL ASSEMBLY

STEP 8:

TEP 9: