Installation Guide

Install the Fixture

If necessary, place the safety cable with washers on each side to the shorter end of the threaded nipple and screw it tightly onto the

mounting plate, then screw the screw collar onto the threaded nipple.

Secure the mounting plate to the electrical box with two mounting plate screws.

Secure the safety cable to a secure solid structure in accordance with local building code.

Determine the wanted height of the fixture and remove a portion of the chain by opening a link with pliers.

Screw the fixture loop onto the fixture. Open the chain link with pliers and install the chain on the fixture loop, then re-close the chain link.

Unscrew the collar nut from the screw collar, install the collar nut and the canopy onto the chain (in that order).

Open a link on the other end of the chain with pliers and install the chain onto the screw collar to secure the fixture, re-close the link.

Weave the cord through the chain, canopy, collar nut, screw collar, threaded nipple, and out of the electrical box. Trim the cord leaving

enough to make electrical connections.

Connect the fixture to a suitable ground in accordance to local electrical codes.

Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.

Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.

Neatly place all the wires into the electrical box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut tightly

onto the screw collar.

Place the shade and spacer onto the shade base and secure them in place by installing and tightly screwing the shade collar nut onto the

socket using the shade tool; repeat for all shades.

Screw the lamps into the sockets.

Install the ring to the center of the fixture and secure it in place using the ball nuts.

Screw the short threaded nipple to the bottom of the fixture.

Install the decorative cup and spacer onto the short threaded nipple and secure them in place by tightening the finial.

ELECTRICAL BOX

MOUNTING PLATE SCREW

CANOPY

COLLAR NUT

FIXTURE LOOP

CHAIN

SCREW COLLAR

THREADED NIPPLE

MOUNTING PLATE

LAMP

SHADE

SHADE BASE

SOCKET

SHADE COLLAR NUT

SPACER

Use 120 voltMAX 100 Watt

Type A19 Medium Base Lamp.

FINIAL

SHORT THREADED NIPPLE

DECORATIVE CUP

RING

BALL NUT

SHADE TOOL

SAFETY CABLE

DECORATIVE SPACER