Manualshelf

Installation Guide

ManualsBrandsSea Gull Lighting ManualsChandeliers3113409-05
1234
1A
Install the Fixture
Use 120 voltMAX 100 Watt
Type A19 Medium Base Lamp.
ELECTRICAL BOX
MOUNTING PLATE
CANOPY
THREADED NIPPLE
SCREW COLLAR
COLLAR NUT
FIXTURE LOOP
LAMP
SHADE
SHADE BASE
SOCKET
CHAIN
12
2
If necessary, place the safety cable with washers on each side to the shorter end of the threaded nipple and screw it tightly onto the
mounting plate, then screw the screw collar onto the threaded nipple.
Secure the mounting plate to the electrical box with two mounting plate screws.
Secure the safety cable to a secure solid structure in accordance with local building code.
Determine the wanted height of the fixture and remove a portion of the chain by opening a link with pliers.
Screw the fixture loop onto the column, then the column onto the fixture. Open the chain link with pliers and install the chain on
the fixture loop, then re-close the chain link.
Unscrew the collar nut from the screw collar, install the collar nut and the canopy onto the chain (in that order).
Open a link on the other end of the chain with pliers and install the chain onto the screw collar to secure the fixture, re-close the
link.
Weave the cord through the chain, canopy, collar nut, screw collar, threaded nipple, and out of the electrical box. Trim the cord
leaving enough to make electrical connections.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the electrical box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut
tightly onto the screw collar.
Place the shade and spacer onto the shade base and secure them in place by installing and tightly screwing the shade collar nut
onto the socket; repeat for all shades.
Screw the lamps into the sockets.
1
2
3
4
5
6
7
8
9
10
11
12
SHADE COLLAR NUT
COLUMN
5
5
14
13
SPACER
1
2
14
13
MOUNTING PLATE SCREW
SAFETY CABLE
3
7