Installation guide

F
OR YOUR SAFETY
A
SSEMBLY
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORK-
I
NG ON IS SHUT OFF. EITHER THE FUSE REMOVED OR THE CIRCUIT
BREAKER OFF.
You don’t need special tools to install this fixture. Be sure to follow the steps
in the order given. Under no circumstances should a fixture be hung on
house electrical wires, nor should a swag type fixture be installed on a ceiling
which contains a radiant type heating system. Read instructions carefully.
If
you are unclear as to how to proceed, consult a qualified electrician.
Carefully remove the fixture from the carton and check that
a
ll parts are included, as shown in Figure 1 & 2. Be careful
not to misplace any of the screws or parts which are needed
t
o install this fixture.
FIGURE 1
*
OUTLET BOX
*OUTLET BOX
SCREWS
*WIRE CONNECTORS
SCREW COLLAR (E)
CANOPY (H)
MOUNTING BAR (A)
*NOT SUPPLIED
*GROUND WIRE
GROUND WIRE (F)
CHAIN (S)
FIXTURE LOOP (I)
THREADED
GLASS
RETAINER
RING (L)
(If applicable)
GLASS (J)
SOCKET (K)
CENTER
LIGHT
(IF APPLICABLE)
SCREW COLLAR
RING (G)
GREEN
GROUNDING
SCREW (D)
NIPPLE (C)
*OUTLET BOX
SCREWS
MOUNTING
BAR (A)
*WIRE
CONNECTORS
*GROUND WIRE
*OUTLET BOX
GROUNDING AND MOUNTING BAR LOCK UP
FIGURE 2
*NOT INCLUDED
NUT (B)
A
ttach loop [I] to top of fixture (if applicable).
STEP 1:
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PERSONAL INJURY,
MOUNT TO OUTLET BOX OR SUPPORTING
SYSTEM ABLE TO SUPPORT THE WEIGHT OF
THE FIXTURE.
Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
HC-229
0
92998
GENERAL