Installation Guide

2
1A
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate studs and secure it using the cap nuts.
Place the shade over the socket and secure it by screwing the collar nut onto the socket.
Install the lamp by pushing the lamp pins into the large portion of the socket slots and rotating it clockwise to lock in
place.
Place the diffuser into the frame, then secure the support brackets to the socket housing and frame using the thumb
screws.
1
2
3
4
5
6
7
ELECTRICAL BOX
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
MOUNTING
PLATE SCREW
FIXTURE BASE
THUMB SCREW
LAMP
SHADE
Install the Fixture
MOUNTING
PLATE
COLLAR NUT
3
5
8
6
1
8
4
CAP NUT
DIFFUSER
FRAME
SUPPORT
BRACKET
SOCKET HOUSING
1
1
1
7
8
8 8
Use type spiralMAX 13 Watt
self-ballasted, GU24 base
compact fluorescent lamp.