Installation Guide

2
1A
1
1
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align then place the fixture base onto the mounting plate studs and secure it with the two ball nuts.
Place the shade onto the shade base and secure it in place by installing and tightly screwing the shade collar nut onto
the socket.
Screw the lamp into the socket.
1
2
3
4
5
6
7
2
3
4
5
5
ELECTRICAL BOX
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
MOUNTING
PLATE SCREW
FIXTURE BASE
BALL NUT
LAMP
SHADE
SOCKET
Install the Fixture
MOUNTING
PLATE
Use 120 voltMAX 60 Watt
Type A19 Medium Base Lamp.
SHADE BASE
7
SHADE COLLAR NUT
6
5