Installation Guide

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate stud(s) and secure it using the cap nut(s).
Place the shade onto the socket and secure it in place by screwing the collar nut onto the socket using the shade tool.
Repeat remaining shades.
Screw the lamps into the sockets. Refer to the socket for Max Wattage information.
1
2
3
4
5
6
7
Install the Fixture
LAMP
SOCKET
SHADE
COLLAR NUT
FIXTURE BASE
MOUNTING
PLATE
CAP NUT
7
6
3
4
1
JUNCTION BOX
MOUNTING
PLATE STUD
1
SHADE TOOL
5 5
2