Installation Guide

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align, then place the fixture base onto the mounting plate studs and secure it with the two cap nuts.
Place the shade over the socket and onto the shade base, then secure it in place by screwing the collar nut onto the socket.
Repeat for remaining shades.
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
Install the Fixture
6
3
4
JUNCTION BOX
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
CAP NUT
MOUNTING
PLATE
LAMP
COLLAR NUT
SHADE
SOCKET
SHADE BASE
7
1
1
5