Installation Guide

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align and place the fixture base onto the mounting plate studs and secure it with the cap nuts.
Place the outer shade, spacer and inner shade onto the shade base, in that order. Then secure with the shade collar nut.
Repeat for remaining shades. Over-tightening the collar nut may cause the glass to break and result in injury.Caution:
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
7
Install the Fixture
1
4
3
7
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK
WIRE
MOUNTING
PLATE STUD
MOUNTING
PLATE
JUNCTION BOX
CAP NUT
LAMP
OUTER
SHADE
SOCKET
SHADE BASE
5
COLLAR NUT
FIXTURE BASE
6
1
5
INNER
SHADE
SPACER
COLLAR NUT
TOOL
MOUNTING
SCREW
6
6
6