Installation Guide

1A
Install the Fixture
2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture base onto the mounting studs, and secure it in place by screwing the cap
nuts onto the studs.
Place the shade and spacer over the socket and secure them in place by screwing the shade collar nut onto the socket. Repeat for remaining
shades.
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
7
JUNCTION BOX
MOUNTING PLATE
MOUNTING STUD
CAP NUT
SOCKET
SHADE
COLLAR NUT
LAMP
7
6
3
4
5
SPACER