Installation Guide

2
1A
Separate the assembly from the mounting plate by removing the two thumb screws.LED
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white wire to the neutral power line wire with a wire nut.
Connect the black wire to the hot power line wire with a wire nut.
Neatly place the wires into the junction box and reinstall the assembly to the mounting plate using the two thumbLED
screws.
Install the diffuser by sliding it through the upper and lower frames.
1
2
3
4
5
Install the Fixture
6
7
DIFFUSER
4
5
LED ASSEMBLY
2
7
THUMB SCREW
LOWER FRAME
2
UPPER FRAME
JONCTION BOX