Installation Guide

2
1A
(Optional, mounting plate purchased separately):Secure the mounting plate to the junction box.
Squeeze the fixture base at each end and in the center to release the clips. Pull the LED assembly up while squeezing the
fixture base to separate the LED assembly from the fixture base.
Determine the position of the fixture and mark the location of the drywall anchors.
Install the anchors.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base to the ceiling with the provided fixture screws.
Align the LED assembly to the fixture base and snap it into place.
1
2
3
4
5
FIXTURE BASE
Install the Fixture
6
LED ASSEMBLY
FIXTURE SCREW
ANCHOR
7
8
3
8
9
JUNCTION BOX
MOUNTING
PLATE SCREW
MOUNTING PLATE
1
7
6
TO FIXTURE
(Optional) J-Box
Installation
9
2
2
2
7
6