Instructions / Assembly

Installation Instructions for

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

1.0

990C5_27093S-KOL

Ceiling

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for damp locations.

For a complete list of dimmers, visit out website at

www.seagulllighting.com.

This instruction shows a typical installation.

Kolmar Ceiling

7400 Linder Ave, Skokie, 160077IL

800.969.3347

www.generationlighting.com

The "Generation Lighting" graphic is a registered trademark of

Generation Lighting. Generation Lighting reserves the right to

change specifications for product improvements without notification.

5727093S, 5927093S

SAVETHESE INSTRUCTIONS!

PAGE 1
Installation Instructions for 990C5_27093S-KOL Kolmar Ceiling 5727093S, 5927093S CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Ceiling Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations.
PAGE 2
Install the Fixture 1A JUNCTION BOX 5 3 4 6 6 7 ANCHOR BACKPLATE 7 MOUNTING SCREW 8 DIFFUSER 1 Level and center the backplate over the junction box, then mark the anchor holes locations through the holes on the mounting plate. 2 Drill appropriate sized holes at the marked locations. 3 Connect the fixture to a suitable ground in accordance with local electrical codes. 4 Connect the white fixture wire to the neutral power line wire with a wire nut.