Installation Guide

GROUNDING INSTRUCTIONS: The green grounding screw (D) is to

be inserted into the hole with two raised dimples provided on the

ounting bar (A). Wrap the ground wire (F) from the fixture and the

ground wire from the outlet box (bare metal or green insulated wire)

around the green grounding screw (D) on the mounting bar (A) if

uninsulated wire is on the mounting bar (A), connect the ground wire

(F) from the fixture and the outlet box to it using a small wire

connector (not supplied).

NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER

SUPPLY WIRES.

INSTALLATION (continued) HC-1434

STEP 6:

After wires are connected, tuck them carefully inside outlet box and

then raise the canopy (H) against ceiling and thread the collar ring (I)

to the collar (E).

Make sure no bare wires can be seen outside wire connectors.

Install lamp (not supplied).

Rest diffuser ring (M) on lip of shade (G). Raise shade (G) to socket

and secure by threading glass retaining ring (L) onto socket.

FINAL ASSEMBLY

STEP 7:

STEP 8:

STEP 9:

A. Use a listed wire connector to connect the fixture hot wire (black

wire, or round and smooth tracer) to the supply hot wire.

se a listed wire connector to connect the fixture common wire

(white wire, or square and rigid) to the supply common wire.

C. Gently try to remove the wires from the connector. If you can

remove the wires, carefully re-do the wiring connection.

STEP 5: