Installation Guide

2
1A
Install the Fixture
JUNCTION BOX
MOUNTING PLATE
Secure the mounting plate to the junction box.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Install the shade bracket:
A) Lift up the clips on the shade bracket.
B) Insert the shade bracket into the shade at an angle.
C) Snap the clips back down onto the top of the shade.
Align the holes on the shade bracket with the holes on the cover and secure it in place with the shade screws.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place using the canopy
screws.
1
2
3
4
5
6
7
8
LAMP
BRACKET
CANOPY
COVER SCREW
6
7
4
2
CANOPY SCREW
CLIP
SHADE
COVER
3