Installation Guide

INSTALLATION AND SAFETY INSTRUCTIONS
Carefully remove the fixture from the carton and check that all parts
are included, as shown in Figure 1 & 2. Be careful not to misplace
any of the screws or parts which are needed to install this fixture.
IF SUPPLY WIRES ARE LOCATED
WITHIN 3" OF BALLAST, USE WIRE
RATED FOR AT LEAST 90˚C.
• Be sure the electricity to the system you are working on is turned
off; either the fuse removed or the circuit breaker set at off.
• Use of other manufacturers components will void warranty, listing
and create a potential safety hazard.
• If you are unclear as to how to proceed, contact a qualified
e
lectrician.
• You don’t need special tools to install this fixture.
• Be sure to follow the steps in the order given.
• Read instructions carefully.
• For fixtures provided with 75° C or 90° C supply wire warning only
(these warnings are provided on the label and on the fixture carton).
Risk of fire. Most dwellings built before 1985 have supply wire rated
60°C. Consult a qualified electrician before installing.
• Save these instructions.
IMPORTANT SAFETY INSTRUCTIONS
Installation And
Safety Instructions
HC-332
081507
File This Sheet For Future Reference. ITEM#_______________
FIGURE 1
*NOT SUPPLIED
Line art sho
wn ma
y not exactly matc
h the fixture enclosed.
Ho
wever, the installation instructions do apply to this fixture.
BEFORE YOU BEGIN
*OUTLET
BOX
SCREWS
MOUNTING
BAR (A)
*WIRE
CONNECTORS
*GROUND WIRE
*OUTLET BOX
GROUNDING AND MOUNTING
BAR LOCK UP
FIGURE 2
*NO
T INCLUDED
GREEN
GROUNDING
SCREW (D)
NIPPLE (C)
NUT (B)
*OUTLET BOX
MOUNTING
BAR (A)
NUT (B)
NIPPLE (C)
*GROUND
WIRE
*OUTLET
BOX SCREWS
*WIRE
CONNECTORS
FIXTURE
PAN (G)
C
AP NUT (H)
C
AGE (F)
DIFFUSER
PANELS (E)
FIXTURE
MOUNTING
SCREWS
(J)