Installation Guide

FOR YOUR SAFETY
ASSEMBLY
IF APPLICABLE: TO REMOVE THE PACKAGING
GENERAL
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU
ARE WORKING ON IS SHUT OFF; EITHER THE FUSE REMOVED
OR THE CIRCUIT BREAKER OFF .
You don’t need special tools to install this fixture. Be sure to follow the
steps in the order given. Under no circumstances should a fixture be
hung on house electrical wires, nor should a swag type fixture be
installed on a ceiling which contains a radiant type heating system.
Read instructions carefully.
If you are unclear as to how to proceed,
consult a qualified electrician.
NOTE: Proper wiring is essential for the safe operation of this
fixture.
Remove finial (A), and o-ring (F) from center pipe (B) to remove top
assembly (C) and hood (E) (if applicable).
1. Remove the 3 retaining screws, and remove the cage.
2. Remove the cardboard packaging.
3. Replace cage and screws.
NOTE FOR FIXTURES THAT ARE SOLID BRASS:
Your handcrafted, solid brass lighting fixture has been coated
with a durable, baked on acrylic lacquer which gives maximum
protection against the weather. In time, however, the brightness
of the brass will tarnish giving way to an authentic old world
brass finish.
NOTE: To keep your solid polished brass fixture looking new
for years to come, regularly apply a good quality non-abrasive
car wax to all metal surfaces, giving the fixture an extra
protective coating.
FIG. 1
STEP 1:
STEP 2:
Remove cage (D) (if applicable).
WARNING
NOTE: DO NOT INSTALL ON A POST OR A POLE THAT
RESULTS IN A VERTICAL RISE OF 25 FEET OR HIGHER.
FINIAL (A)
O-RING (F)
TOP
ASSEMBLY (C)
HOOD (E)
CENTER
PIPE (B)
CAGE (D)
FITTER (F)
SOCKET
COVERS (G)
NOTE: This glass is handcrafted, the slight imperfections in
the glass add to the authenticity of the fixture.
CAUTION:
Fixtures with photo-cells should be mounted at least 48”
from all sides to avoid reflection of light back onto Photo-cell,
causing the Photo-cell to malfunction or flicker.
Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
HC-233
0
12405

Summary of content (2 pages)