Installation Guide

2
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Secure the fixture to the post with post screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Place the cover onto the studs on the fixture and secure it in place with the cap nuts.
1
2
3
4
5
6
Install the Fixture
POST SCREW
FIXTURE
LAMP
COVER
POST
6
3
CAP NUT
2
1
STUD
44
5
6