Installation Guide

ManualsBrandsSea Gull Lighting ManualsLightingYorktown 1-Light Black Outdoor Wall Mount Lantern with LED Bulb

• Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• You don't need special tools to install this fixture. Be sure to follow

the steps in the order given.

• Be sure to follow the steps in the order given.

• Read instructions carefully.

• Proper wiring is essential for the safe operation of this fixture.

• To reduce the risk of fire, electric shock, or personal injury, mount

to outlet box or supporting system able to support the weight of

the fixture.

• Fixtures with photo-cells should be mounted at least 48" from all

sides to avoid reflection of light back onto Photo-cell, causing the

Photo-cell to malfunction or flicker.

• Save these instructions.

FIGURE 1

INSTALLATION AND SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

Carefully remove the fixture from the carton and check that all parts

are included, as shown in figure 1 and 2. Be careful not to misplace

ny of the screws or parts which are needed to install this fixture.

Installation And Safety

Instruction

HC-642

042408

Line art shown may not exactly match the fixture enclosed.

However, the installation instructions do apply to this fixture.

Fill In Item Number On Carton And

File This Sheet For Fixture Reference. ITEM#_________

GLASS (R)

IMPORTANT SAFETY INSTRUCTIONS

*NOT INCLUDED

WIRE

CONNECTOR

MOUNTING

SCREWS (I)

BACK PLATE (M)

NOTE: THIS GLASS IS HANDCRAFTED, THE

SLIGHT IMPERFECTIONS IN THE GLASS ADD TO

THE AUTHENTICITY OF THE FIXTURE.

GROUND

WIRE

RETAINING RING (Y)

GLASS SUPPORT RING (Z)

*NOT SUPPLIED

CROSS

MOUNTING

BAR (J)

*WIRE

CONNECTOR

MOUNTING

SCREWS

(I)

*OUTLET BOX

SCREWS

*OUTLET

*BOX

FIGURE 2

GROUNDING & MOUNTING

BAR LOCK UP

CROSS

MOUNTING

BAR (J)

GREEN GROUND

SCREW (L)

CAUTION:

Fixtures with photo-cells should be mounted at least 48” from

all sides to avoid reflection of light back onto Photo-cell,

causing the Photo-cell to malfunction or flicker.

Summary of content (2 pages)

PAGE 1
INSTALLATION AND SAFETY INSTRUCTIONS BEFORE YOU BEGIN IMPORTANT SAFETY INSTRUCTIONS • • • • • • • • • • Be sure the electricity to the system you are working on is turned off; either the fuse removed or the circuit breaker set at off. Use of other manufacturers components will void warranty, listing and create a potential safety hazard. If you are unclear as to how to proceed, contact a qualified electrician. You don't need special tools to install this fixture.
PAGE 2
INSTALLATION HC-642 IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX. Insert mounting screws (I) in threaded holes of cross mounting bar (J). Run mounting screws (I) all the way down to heads. STEP 1: Place cross mounting bar (J) against outlet box (not supplied) and secure in place using outlet box screws (not supplied). Be sure the mounting screws (I) are perfectly horizontal so fixture hangs straight. STEP 2: A. Take note of the color of the wire(s) on your fixture.