Instructions / Assembly

WARNING: B E SURE THE ELECTRICITY TO THE WIRES YOU ARE
WORKING ON IS SHUT OFF; EITHER THE FUSE REMOVED OR THE
C IRCUIT BREAKER OFF.
1. Secure surface mount ring to surface
by marking hole location on surface
and screw surface mount ring to
surface making sure surface mount ring does not
ex out of round.
2. Drill wire exit hole in surface or run wire thru notch in surface moun
t ring.
3. Line up retaining springs on
ture housing with grooves in surface
mount ring and press xture housing into surface mount ring.
1. Drill a 2 3/4” dia. hole in surface.
2. Press
ture housing into
2 3/4” dia. hole.
SURFACE MOUNTING
INSTALLATION AND SAFETY INSTRUCTIONS
HC-207
FOR YOUR SAFETY
RECESS MOUNTING
*
NOT INCLUDED
*
TRIM
1/8”
HOOKS (2)
SLOTS (4)
RETAINING SPRING (2)
SURFACE
MOUNT
RING
SCREWS (2)
GROOVES (2)
HOLES (2)
NOTCH
FIXTURE
HOUSING
*
Lamp
051116
2 3/4”
U.S. PATENT #5,465,199
FIG. 1
FIXTURE
WIRE
WARNING: Use of other manufacturer’s components will void warranty, safety
listing and create a potential safety hazard.
CAUTION: RISK OF FIRE. Must use SeaGull No. 9488 fused plug if use
with transformers over 60w at 12 volts or 100w at 24 volts.
ATTENTION-RISQUE D'INCENDIE MAX 18 WATT TYPE WEDGE T5
CAUTION-RISK OF FIRE MAX 18 WATT TYPE WEDGE T5
(UTILISER SEULEMENT AVEC AMBIANCE CÂBLE 105°)
CAUTION: RISK OF FIRE. Use only 12v lamps with 12v systems. Use
of 12v lamps with 24v system may result in damage to the system
and surrounding area.
ATTENTION : RISQUE D'INCENDIE. UTILISER UNIQUEMENT DES LAMPES 12V
AVEC SYSTÈMES 12V. UTILISATION DE LAMPES DE 12V à 24V SYSTÈME PEUT
ENTRAÎNER DES DOMMAGES AU SYSTÈME ET LA RÉGION AVOISINANTE.
(USE ONLY WITH AMBIANCE 105° CABLE)
fusionnés si utiliser avec des transformateurs de plus de 60w à 12 volts ou
100w à 24 volts.
.SeaGullLighting.com
HC-207
www
WARNING – To reduce the risk of FIRE OR INJURY:
-Lighted lamp is HOT!
-Turn o power and allow to cool before relamping lamp.
-Lamps get HOT quickly! Contact only switch/plug
when turning on.
-Do not touch hot lens, guard, or enclosure.
-Keep lamp away from materials that may burn.
-Do not touch lamp at any time. Use a soft cloth. Oil from
skin may damage lamp.
-Do not operate the luminaire with a missing or
damaged shield.
SAVE THESE INSTRUCTIONS