Instructions / Assembly

2
Install the Fixture
Place and level the fixture in the desired location.
Note: Ensure that the wall opening is positioned behind
the top of the fixture
Mark the two points through the mounting holes on
the fixture.
1A
1
1B
Drill appropriate size holes at the marked locations and
install the anchors.
3
2
Place desired number tiles (not included) into back of
fixture (fixture holds five digits). Use two full blank
tiles (9619) for three digit number or two one half
blank tiles (9621) for four digit number.
1C
4
Attach tile support strip to the back of the fixture with
two screws provided.
1D
5
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
1E
6
Properly place all wires and wire nut connections inside
the top of the fixture and secure the fixture to the wall
by screwing the anchor screws into the anchors.
For wet locations, caulk around the base of the fixture
with waterproof construction sealant.
1F
9
2 2
ANCHOR
3
3
12
3
4
5
SUPPORT STRIP
FIXTURE
SUPPORT STRIP SCREW
12
3
4 5
7
8
12
3
4 5
ANCHOR
SCREW
ANCHOR
SCREW
10
5
7
9 9
8
6
10
123 123 4
5
3 DIGIT NUMBER
WITH TWO FULL BLANK TILES
4 DIGIT NUMBER
WITH TWO 1/2 BLANK TILES
FIXTURE
TOP
WALL OPENING