Installation Guide

FINAL INSTALLATION AND FUSING HC-207
There are several ways to install the 9485
(disk-lights) using the 9774, 18w, 12V xenon lamps
(actual consumption = 16.2w):
1. When using a 60w max transformer (class II)
you are able to directly hook up three (3) 9485
to the junction box as in Figure 1.
2. For a run larger than three (3) disk-lights you
must use a class I transformer (larger than
60w). The following example demonstrates a
run of eight (8) 9485 disk-lights (8 x 16.2w
each = 130w), in this case you will need to use
a 150w transformer.
Figure 2 demonstrates fusing each individual disk
light, with a 9488 fused plug.
60W
J-BOX
9485 (3)
FIGURE 1
150W
TRACK & CABLE
9488 (8) FUSED PLUGS
9485 (8)
FIGURE 2