Installation Guide

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align and place the fixture base onto the mounting plate studs and secure it with the cap nuts.
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
Place the shade over the socket and onto the shade base, then secure it in place by screwing the collar nut onto the
socket. Repeat for remaining shades. Over-tightening the screws may cause the glass to break and result inCaution:
injury.
1
2
3
4
5
6
7
Install the Fixture
1
1
3
4
7
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
MOUNTING
PLATE
JUNCTION BOX
CAP NUT
LAMP
SHADE
SOCKET
SHADE BASE
5
6
COLLAR NUT
FIXTURE BASE