Specifications

(8<(3<5.7<)30*:(-,;@)<@,9:.<0+,
^^^HX\HS\UNJVTTPSP[HY`HUKWYVMLZZPVUHS
^^^HX\HS\UNJVTTPSP[HY`HUKWYVMLZZPVUHS
(8<(3<5.7<)30*:(-,;@)<@,9:.<0+,
REGULATORS
For 2013, the entire range of XTX regulators has undergone a refresh. New cosmetics
coupled with great new features will continue to make Apeks the brand most chosen
by serious divers.
•Freshnewlookacrosstheentirerange
• Optional 5th port available for every model with the additional bonus of an integrated
heat exchanger on the XTX200 and XTX100 first stages.
•Braidedexihosesarenowstandardonallmodels.Thesehosesarelighterweight,
moreexibleandmoredurable
•Followingonthesuccessoftheanti-bacterialmouthpiece,anti-bacterialadditivehas
now been molded into most second stage components. This is especially useful with
shared equipment by providing added protection against bacteria.
•Thepurgebuttonsarenowlargerandeasiertooperate.A2-stageprogressivepurge
isused.Pressthepurgeonthesideforalowerowrate,usefulwheremorecontrol
is required such as filling lift bags etc, then press in the center for the full effect of
the purge, i.e. when regulator clearing etc.
•Anewlargerventurileverhasbeenaddedwithasofttouchrubbergrip,which
makes it easier to locate and use.
New XTX Regulators
Tungsten XTX
The XTX Tungsten is built upon the XTX200 platform but with a truly unique, added
feature: it is protected with a hard, durable PVD (Physical Vapor Deposition) finish. This
tough-as-nails finish is better than traditional chrome plating. The coating is made of
high quality grades of Titanium, Zirconium and Chromium. The result is not only rich,
but protects your investment from normal diving abuse.
•FeaturestheinnovativeDiverChangeableExhaust(DCE)Systemallowingthe
diver to change from a large exhaust tee to a smaller exhaust tee. The larger
exhaust tee provides the best exhaust bubble dispersion while the smaller tee
is lighter weight and compact, both are included with the regulator.
•TheXTXTungstencanbeconvertedfromarighthandedhoseconfiguration
to a left handed one. The process of changing the regulator to a left handed
configuration is both quick and simple. However this procedure MUST only be
performed by an Apeks Authorized Service Technician
•TheergonomicventurileveroftheXTXrangehas
been designed to reduce the amount of grit ingress
•Availableinyokeordinconguration
•ThesiliconeexhaustvalveusedontheXTXdemandregulator
range improves the breathing performance of the regulator.
•CompatiblewithEAN40new,outofthebox
Part # Description
AP0335F Tungsten - Yoke
AP0335F-1 Tungsten - DIN
6
|
REGULATORS