User guide

221
6
Downloading Images to Your Computer
After installing the software on your computer, connect your camera
to the computer.
1 Make sure the camera power is off.
2 Connect the USB cable to the
USB port of your computer.
3 Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on and the
computer automatically reads the
necessary files.
4 DL-10 starts and image
transfer begins automatically.
5 When image transfer is completed, disconnect the
camera and the computer. (GP.224)
Note ----------------------------------------------------------------------------------------------
• For how to use DL-10, refer to the “Software User Guide” (PDF file) contained in the
provided CD-ROM. (GP.218)
• If image transfer does not begin, re-start your computer and perform Steps 1 to 5
again.
Caution------------------------------------------------------------------------------------------
• Do not force the USB cable into the terminal.
• Do not apply excessive force with the USB cable connected.
• When using the USB cable, do not move the camera with the USB cable.
Downloading Images Using the Software