Instruction manual

External Controls
E-17
Push the lever to operate them.
The strength of the spring for the shutter
lever can be changed by adjusting the
position of the spring inside the housing.
Factory-set position
Strong Weak
Strength of spring
Longer shutter release
/Less sensitive
Shorter shutter release
/More sensitive
Shutter lever, Multi-function lever
Shutter lever
Factory-set position
<Adjusting shutter sensitivity>
The shutter sensitivity can be adjusted
in two steps by changing the location of
the Adjuster Plate shown in the
diagram.
Loosen the screw.
As you press the shutter lever, set the
Adjuster Plate as shown with
screwdriver.
Tighten the screw.
When shipped from the factory, the
housing is set to the long shutter release.
Sensitivity Adjuster Plate
Screw Pull the shutter lever
Screwdriver