06162 UNDERWATER HOUSING for Nikon D800 / D800E 日本語 MDX-D800 English 取扱説明書 Instruction Manual
Introduction Thank you for purchasing SEA&SEA products. Please read this instruction manual carefully prior to using this product. Only with a thorough understanding of this manual’s content will you be able to use the housing correctly. After reading the manual, please be sure to keep it in a place where you can easily come back to it at any time.
Safety Precautions Do not rest heavy weight on the product. It might deform the outer casing, damage internal parts, make the waterproofing fail, or result in fire or electric shock. Please note that some marks may be left on the camera scraping against the dials or gears of the housing. Handle the product carefully so as not to scratch the front port, the lens, the flash window or the finder.
Precautions on Handling the O-ring Coat with silicone grease Silicone grease protects the O-ring from chafing. After checking the O-ring to make sure that there are no scratches, dust, or debris, apply a light coating of silicone grease to the entire O-ring with your finger. Applying too much grease will make it easier for dust and debris to adhere to the O-ring, and could cause flooding.
Identification of Parts Preparation for Setting Up Front case This product must be used in combination with the optional equipment (digital camera, port, strobe, accessories etc.) for underwater photography. In order to set up the equipment, prepare each item correctly. Quick shoe Prepare the housing and port Maintaining the O-ring This product is kept watertight by the O-ring. To keep the O-ring functioning properly, please observe the following before setting up.
Opening and Closing the Housing Opening and closing the housing is done with the locking latches. Here we will explain how to open and close the locking latches.
Attaching and Detaching the Port Attaching and Detaching the Port In order to use this product underwater, the optional port for the camera lens must be attached to this product. CAUTION Only the optional ports designed for SEA&SEA digital SLR camera housings can be attached to this product. Ports have different depth rating. Check the depth rating for each before use. This product is delivered with a housing body cap attached to the port mount.
Mounting the Camera in the Housing CAUTION Mounting the camera in the Housing 6 Make sure to release the camera's focus selector lock. Remove the strap or the LCD monitor cover from the camera, if any of these accessories are attached. 1 To make sure that the gear attached to the lens and the gear on the front case do not hit each other, rotate the focus / zoom dial while sliding the camera into place.
Mounting the Camera in the Housing Removing the camera from the housing 1 2 3 4 Connecting the Strobe Open the locking latches Connect the strobe with the fiber-optic cable (option) when the strobe is triggered by sensing the light from the camera's built-in flash.
External Controls External Controls Power switch Power switch By rotating the knob as shown, you can turn the power ON/OFF and operate the illumination switch. When shooting without a focus / Zoom gear: Pull the focus / zoom dial out and rotate it so that the convex part of the dial is set in the shallow groove on the spacer.
External Controls Attaching the Optional Accessories Main command dial This product accepts SEA&SEA optional accessories. By using this product in combination with those accessories, you will be able to try various shooting techniques. Rotate the dials while pressing them in to operate them. CAUTION Lenses, strobes and other accessories have different depth rating. Check the depth rating for each before use. Read the instruction manual for each accessory before use.
Attaching the Optional Accessories Finder This product comes equipped with a 0.5x pick-up finder. The finder can be replaced with an optional finder so you can change the finder magnification to match your shooting conditions. Replacing the finder Unit The optional VF45 1.2x (46111) or VF180 1.2x(46112) enhances magnification by 1.2x and enables subtle framing and focusing of subjects.
Attaching the Optional Accessories Accessory shoe Strobes / lights can be mounted to the accessory shoe by using optional Mini Shoe Arm (29511) or Hot Shoe Arm (29501) or SA8 Ball Base for Accessory Shoe（22120）. CAUTION The max. weight of an accessory that can be mounted to the accessory shoe is approx. 1050g / 26.3oz . Remove the accessories from the accessory shoe when carrying the housing out of water.
Specifications Compatible camera Nikon D800 / D800E Controls Power switch, Exposure compensation button, Exposure mode / Formatting memory cards button, Flash pop-up button, Braketing button, Image quality button, White balance button, Release mode dial lock release, Flash mode button, Focus / Zoom dial, AF-mode button, Focus-mode selector dial, Sub-command dial, Shutter lever, Release mode dial, Flash closing lever, Metering selector dial, Main command dial, AF-ON lever, Movie-record lever, Live view bu
シーアンドシー・サンパック株式会社 SEA&SEA SUNPAK Co., Ltd. 〒145-0062 東京都大田区北千束1-4-6 TEL.03-5701-5533 1-4-6, Kitasenzoku, Ohta-ku, Tokyo, Japan 145-0062 TEL. +81-3-5701-5533 World Customer Service Center TEL. +81-48-255-8512 http://www.seaandsea.jp カスタマーサービスセンター TEL.048-255-8512 http://www.seaandsea.co.jp 1203-Z-01A (2012年6月現在 / Current as of Jun.
