System information

Coastal 24 & 30 Ku-Band TVRO Installation
4-5
7 Apply Loctite 241 (supplied) to the outer
threads of the threaded insert and install the
3/8 washers and 3/8-16 hex jam nuts to the
four threaded inserts. This mounts the
Pedestal Assembly inside the radome base.
8 Apply Loctite 241 (supplied) to the top of the
four ¼” diameter x 4” long mounting studs
and install the studs up into the threaded
inserts in the antenna pedestal assembly
from the underside of the radome base.
Thread the stud into the insert until it
bottoms.
9 Install the radome base assembly onto the
vessel by inserting the four mounting studs
through the mounting holes. Assure that
excess cable length feeds into cable
passage where it will not be pinched
between the radome base and the mounting
surface.