System information

DAC-2202 Antenna Control Unit Maintenance & Troubleshooting
7-11
Check the status bar at the bottom edge of the
ProgTerm window. It displays the selected
serial interface (baud rate and port), the
operating mode (DAC Style), and program
destination (ACU, PCU, or DVB).
6. From the “CommPort” menu, select
“Properties”.
7. Verify the correct COM port is selected.
Select correct Maximum Speed (9600
for DAC2200/2202) and 4800 for
DAC03).
8. Press “OK” to confirm any changes.
9. Verify the LED on the right side of the
program is GREEN indicating the port is
open and functional. Click on the LED
or select Port Open from the Comm
Port menu to change the active state of
the port and the LED.
10. Click on the Paper Clip button and
then click on the EyeBall
button in
the tool bar. These query the PCU for
Module Status and Module Version.
The responses will be the Status and
Version of the PCU which the ACU is
connected to (such as “3004 VER
2.xxL”). Both of these data requests
must function properly before you can
continue.