Installation manual

Setup – Modem Connections, Setup and Test 6009-33 Installation Manual
11-5
to change the next digit. Continue until frequency value, recorded in step 3, is displayed and press the
ENTER key to re-tune the tracking receiver.
11.8. SAVE NEW PARAMETERS
Parameters that have been changed are only temporarily changed until they are SAVED. If changes are made and not
stored, they will still be effective but will be lost when power is removed or the RESET key is pressed. Simultaneously
press, and quickly release the LEFT & RIGHT arrow keys to access “SAVE NEW PARAMETERS” directly from any other
menu display. Verify that the change(s) you have made is/are correct and then select “SAVE NEW PARAMETERS”.
Press UP arrow and then ENTER to save any recent changes into the ACUs NVRAM for permanent storage.