Installation manual

6009-33 Installation Manual Setup – Other Parameters
13-6
13.10.1. System Information
Number Description
1
Click to redirect to the Port Settings Page. This page presents the TCP connection
and baud rate settings for the Comm If Module.
2
Click to redirect to the DAC Parameters 1 Page. This page presents the current
ACU configuration parameter values stored in the 68HC08 processor.
3
Click to redirect to the DAC Parameters 2 Page. This page presents the current
Satellite Tracking parameter values stored in the 68HC08 processor. This page also
contains the currently defined blockage zones (Az Limits 1-6).
4
The ACU Model field displays the software version currently installed in the
DAC2202 M/B.
5
Click to redirect to the Status page. This page presents current system status,
including Tracking condition, Antenna Position, Vessel Location / Orientation, and
decoded error conditions.
6
The PCU Model field displays the Antenna model configuration and the software
version currently installed in the PCU.
7
The Comm Interface field displays the currently software version installed onto the
Comm If Module.
8
The Serial Number display fields are NOT currently being used.