Installation manual

6009-33 Installation Manual Setup – Other Parameters
13-12
6
Click to redirect to the Home page. This page presents current system software versions
and antenna model configuration.
7
The Refresh field allows the user to adjust the page refresh settings, AUTO is selected by
default, which refreshes the displayed page every 5 seconds
8
These fields presents the antenna’s positional and signal strength information currently
stored. To change a parameter value mouse click inside the entry field and type in the
desired value Refer to Setup (Section 5) of this manual for acceptable range values.
9
The Control field buttons allow the user to Toggle the antennas’ current tracking condition
or to clear any reported errors as reported in fields 10 and 11.
10
The ACU Errors box is a read only field that presents the decoded ACU reported errors that
are currently triggered. Refer to the Maintenance section of this manual for troubleshooting
frequent or constant errors.
11
The PCU Errors box is a read only field that presents Pedestal reported errors currently
triggered. Refer to the Maintenance section of this manual for troubleshooting frequent or
constant errors.