Specifications

Engine Will Not Start
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
Safety lanyard removed.
Install cap over post.
Burnt fuse:
Carburetor-equipped
models:
On MPEM or in electrical
box: battery, starting
system
RFI models:
Starter solenoid on VCM or
main fuse.
Check wiring then replace
fuse(s).
Discharged battery. Refer to an authorized
Sea-Doo dealer.
Battery connections,
corroded or loose.
Refer to an authorized
Sea-Doo dealer.
Water-flooded engine. Refer to
WATER-FLOODED
ENGINE in SPECIAL
PROCEDURES.
Carburetor-equipped
models:
Faulty MPEM.
RFI models:
Faulty sensor, VCM or
ECM.
Refer to an authorized
Sea-Doo dealer.
Seized engine.
Refer to an authorized
Sea-Doo dealer.
Engine does not turn over.
Seized jet pump. Try to clean. Otherwise,
refer to an authorized
Sea-Doo dealer.
Loose battery cable
connections.
Check/clean/tighten.
Discharged or weak
battery.
Refer to an authorized
Sea-Doo dealer.
Engine turns slowly.
Worn starter. Refer to an authorized
Sea-Doo dealer.
92
______________________
www.SeaDooManuals.net