Operating instructions

36
All Models except GTX DI
1. Engine start/stop button
GTX DI Models
1. Engine Start/Stop button
5) Variable Trim System
(VTS) Button
(if so equipped)
Located just below engine start/stop
button, this button is used to change
pump jet nozzle position and to adjust
ride to suit watercraft load and water
conditions.
1. VTS button
A VTS position indicator is included in
the information center gauge. See else-
where in this section.
6) Choke Lever
Carburetor-Equipped Models
The choke is provided to supply a rich-
er fuel/air mixture when starting a cold
engine.
Choke lever should be pulled and held to
operate. Lever will automatically return
to its normal position when released.
1. Choke lever
7) Shift Lever
A push-pull lever:
– forward
– neutral
– reverse.
CAUTION: Never rev the engine at
high RPM in reverse.
F01L63Y
1
1
F18L09Y
F01L62Y
1

WARNING
Shift lever should only be used
when the engine is idling and craft
is completely stopped. Do not use
as a grab handle.

WARNING
Only use reverse at slow speed and
for the shortest time possible. Al-
ways ensure the path behind is
clear of objects and persons includ-
ing children playing in shallow wa-
ter.
1
F17L0GY
smo2003-001a.book Page 36 Monday, July 22, 2002 11:50 AM