Operating instructions

40
Display Priorities
As a self test, all LCD segments and the
LED will turn on for 3 seconds each time
the information center is activated
(when safety lanyard is installed).
When the information center is activat-
ed, the last function set will be dis-
played if it was the tachometer, speed-
ometer or chronometer. If another
function was set, the compass will be
displayed. On models without the
compass function, the word “SeaDoo”
will be displayed.
In the event of a warning message, the
message will blink and override the
units display.
If more than one warning message oc-
curs, the blinking messages will scroll
every 4 seconds.
Other Functions
The following describes how to select
other available functions.
Language Option
While in the compass mode (while
“SeaDoo” is displayed on models
without compass):
1. Press and hold for 2 seconds
1. Repeatedly press
1. Press to end
English/Metric System
Allows to display the units in the met-
ric system or in the SAE English sys-
tem.
1. Press TOGETHER and hold for 2 seconds
Chronometer
While in the chronometer mode:
1. Press to start or stop chronometer
1. Press and hold for 2 seconds to reset
Chronometer is reset every time en-
gine is turned off.
F00L2B0
1
F00L2BZ
1
F00L2B0
1
F00L2B1
1
F00L2B0
1
F00L2B0
1
smo2003-001a.book Page 40 Monday, July 22, 2002 11:50 AM