Operating instructions

44
All Models
To remove seat, pull the latch lever up-
ward and hold. Lift and pull the seat
rearward.
NOTE: On the 3-up seat models, it is
necessary to remove the seat exten-
sion first and repeat the same proce-
dure to remove the seat.
Engine Compartment
This is where the mechanical, electri-
cal and fuel/oil systems are located.
Some Models
When reinstalling the seat, insert seat
front tab into body hook.
1. Insert this tab in hook
2. Hook
Some Models
When reinstalling the seat, insert seat
hook into body front tab for each por-
tion of the seat.
1. Insert this tab in hook
2. Hook
Some Models
When reinstalling the seat, place seat
cavity over body hook.
1. Seat cavity
1. Body hook

WARNING
Components inside engine com-
partment may be hot. When start-
ing or operating the engine, do not
touch any electrical part. Never
leave any object, rag, tool, etc., in the
engine compartment or in the bilge.
F01L92Y
12
F06L12Y
1
2
1
F17L0NY
1
F17L0MY
smo2003-001a.book Page 44 Monday, July 22, 2002 11:50 AM