Operating instructions

47
28) Boarding Pads
Provide a cushioned surface for the
knees when boarding from rear of wa-
tercraft.
All Models
29) Boarding Platform
Provides a large surface for easier board-
ing from rear of watercraft.
30) Boarding Step
(if so equipped)
A convenient step to help reboarding
the watercraft.
1. Boarding step
Pull down the step with your hand and
hold until a foot is put on the step.
31) Cooling System Bleed
Outlet
All Models
TYPICAL
1. Bleed outlet
When engine is running, water should
flow from the outlet. This allows air in
engine cooling system to escape. It
also indicates that water is circulating
in the cooling system.
NOTE: It may be required to increase
slightly the engine RPM to see the wa-
ter flowing out.
CAUTION: Should water not flow
from outlet a few seconds after en-
gine starts, immediately stop engine
and refer to POST-OPERATION CARE
and look for COOLING SYSTEM
FLUSHING or refer to an authorized
SEA-DOO dealer for servicing.
F18L0IY
1
F18L0JY
F12L05Y
1
smo2003-001a.book Page 47 Monday, July 22, 2002 11:50 AM