Operating instructions

78
NOTE: Some items are included in the PRE-OPERATION CHECKS and not nec-
essarily repeated in this chart.
D: Dealer
C: Customer
➀ Every 10 hours in salt water use.
➁ These items have to be initially checked after 25 hours. Thereafter, servicing
to be made as specified in this chart.
➂ Daily flushing in salt water or foul water use.
➃ Except DI models.
➄ Emission-related component.
➅ In salt water use.
➆ Replace at 150 hours.
➇ Replace at 250 hours.
➈ Check at 350 hours or 5 years.
ELECTRICAL
SYSTEM
Electrical connections condition and fastening
(ignition system, electrical box(es), starting system,
fuel injectors (RFI and DI models), etc.)
IID
MPEM mounting brackets/fasteners I D
Digitally Encoded Security System I I D
Monitoring beeper I I D
Battery condition and strap(s)/fasteners I I D
STEERING
SYSTEM
Steering cable I I D
O.P.A.S.
SYSTEM
O.P.A.S. system I I D
PROPULSION
SYSTEM
Drive shaft boot and spline condition (if so equipped)I ➁ D
Drive shaft protection hose I ➁ D
PTO flywheel L L C
Shifter system/cable I I D
VTS (Variable Trim System) (if so equipped)I ID
Jet pump reservoir oil level/oil condition R I R D
Jet pump cover pusher (if so equipped)ID
Impeller shaft seal ➆ D
Impeller condition and impeller/wear ring clearance R ➁ D
Water intake grate condition I ➁ C
HULL AND
BODY
Bailer pick-ups, check for obstructions I I C
Hull condition I I C
DESCRIPTION FREQUENCY
I: Inspect, verify, clean, adjust, lubricate,
replace if necessary
C: Clean
L: Lubricate
R: Replace
FIRST 10 HOURS EVERY 25 HOURS OR 3 MONTHS EVERY 50 HOURS OR 6 MONTHS EVERY 100 HOURS OR 1 YEAR TO BE PERFORMED BY
smo2003-001a.book Page 78 Monday, July 22, 2002 11:50 AM