Operating instructions

88
This hose is located at the bottom of
the magneto cover beside the engine
support.
TYPICAL
1. Press tabs here and disconnect hose
Water should flow out of the fitting
(magneto cooling circuit) and hose
(crankcase heat exchanger). Push and
hold hose against bilge so that draining
can take place.
TYPICAL
1. Fitting
2. Hose
Reconnect hose when done.
RX DI Models
Disconnect the quick connect fitting.
Press both tabs and pull fitting.
DISCONNECT THIS HOSE
GTX DI Models
DISCONNECT THIS HOSE
F17E0AY
1
1
2
F17E0BY
F07E0HY
F18E02Y
smo2003-001a.book Page 88 Monday, July 22, 2002 11:50 AM