smo2002-005a.book Page 0 Friday, September 7, 2001 11:34 AM SAFETY WARNING Disregarding any of the safety precautions and instructions contained in this Operator’s Guide, the Safety Handbook, the Safety Videocassette and on the on-product warning labels could cause injury, including the possibility of death. The operator has the responsibility to inform passenger(s) of safety precautions. This Operator’s Guide, the Safety Handbook and Safety Videocassette should remain with the craft at the time of resale.
smo2002-005a.book Page 1 Friday, September 7, 2001 11:34 AM NOTE Dear 2002 GTX DI watercraft owner. Informations on the RX DI model in the 2002 Operator’s Guide (P/N 219 000 145) apply to your GTX DI except for the following.
smo2002-005aTOC.fm Page 2 Wednesday, September 26, 2001 11:39 AM TABLE OF CONTENTS NOTE....................................................................................................... TABLE OF CONTENTS ................................................................ 1 2 LOCATION OF THE IMPORTANT LABELS ................................... 3 LOCATION OF CONTROLS, COMPONENTS AND INSTRUMENTS ...........................................................................
smo2002-005a.book Page 3 Friday, September 7, 2001 11:34 AM LOCATION OF THE IMPORTANT LABELS GTX DI Model 14 6 F18L03L TYPICAL GTX DI Model Only The location of this label differs on the GTX DI model. Label 14 Label 6 WARNING DO NOT BOOST BATTERY WHILE INSTALLED.
smo2002-005a.
smo2002-005b.fm Page 5 Wednesday, September 26, 2001 11:49 AM 4. 12. 13. 17. 21. 24. 25. Engine Start/Stop Button Information Center Gauge/Buttons Glove Box Front Storage Compartment Cover Tool Kit Seat Latch Seat Extension Latch 27. 34. 35. 42. 43. 44. Rear Storage Basket Boarding Step Cooling System Bleed Outlet Fuses Battery Side Vanes NOTE: Some components shown in the 2002 Sea-Doo Operator’s Guide do not apply to this watercraft.
smo2002-005a.book Page 6 Friday, September 7, 2001 11:34 AM 17) Front Storage Compartment Cover Gauge Description 2 1 Refer to the following updated text and illustrations. It gives access to the front storage compartment. Always relatch cover after closing. Front Storage Compartment A convenient watertight area to carry personal articles. Ideal location for towrope, first aid kit, etc. WARNING 3 F18L06Y 1. 2. 3. 4.
smo2002-005a.book Page 7 Friday, September 7, 2001 11:34 AM The front storage area includes a latch to hold an approved fire extinguisher (sold separately). 1 2 F18L0LY 1. Retaining straps 2. Extinguisher (sold separately) WARNING Ensure to properly secure extinguisher with the supplied retaining straps. 1 F18L0CY 1. Seat latch 25) Seat Extension Latch It is the same operation as explained in the 2002 Operator’s Guide for 3-up seat models. Refer to the following updated illustration.
smo2002-005a.book Page 8 Friday, September 7, 2001 11:34 AM 27) Rear Storage Basket 2 It is the same operation as explained in the 2002 Operator’s Guide for 3-up seat models. Refer to the following updated illustration. F18L0HY F18L0GY 1 1. Rear storage basket Spare Spark Plug Holder The storage basket features a spare spark plug holder. To keep spare spark plugs dry and prevent shocks that might affect the adjustment or break them, a holder is provided.
smo2002-005b.fm Page 9 Wednesday, September 26, 2001 11:50 AM 1 F18L0JY 35) Cooling System Bleed Outlet It is the same operation as explained in the 2002 Operator’s Guide. Only the location differs. Refer to LOCATION OF CONTROLS, COMPONENTS AND INSTRUMENTS section. 42) Fuses It is the same information as explained in the 2002 Operator’s Guide. The location and the description differ. Refer to LOCATION OF CONTROLS, COMPONENTS AND INSTRUMENTS section and the following updated illustrations.
smo2002-005a.book Page 10 Friday, September 7, 2001 11:34 AM OPERATING INSTRUCTIONS For the GTX DI model, follow the instructions given for the GTX series and 3-up seat models in the 2002 Operator’s Guide (P/N 219 000 145). SPECIAL PROCEDURES Towing the Watercraft in Water It is the same as explained in the 2002 Operator’s Guide. Only the hose routing differs. Refer to the following updated illustration. F18E01Y 1 GTX DI MODEL 1.
smo2002-005a.book Page 11 Friday, September 7, 2001 11:34 AM MAINTENANCE Fuses It is the same information as explained in the 2002 Operator’s Guide except for the following. Refer to the updated text and illustrations. MPEM To access fuses on the MPEM, remove seat. Locate MPEM besides engine. 1 2 F18H05Y 1. MPEM 2. Fuses location Fuses are identified, look above and besides the fuse holder. 2 F1 : FP F2 : ACC F3 : REG F4 : VTS F5 : BAT F6 : INJ 1 15A 2A 25A 7.
smo2002-005a.book Page 12 Friday, September 7, 2001 11:34 AM Rear Electrical Box Remove seat. Locate electrical box at the back of the bilge. F18H01Y 1 1. Electrical box Unclip and remove cover of the electrical box to expose the holder of the main fuse. 1 F18H02Y TYPICAL 1. Fuse holder Properly reinstall removed components.
smo2002-005a.book Page 13 Friday, September 7, 2001 11:34 AM TRAILERING, STORAGE AND PRE-SEASON PREPARATION It is the same information as explained in the 2002 Operator’s Guide except for the following updated illustrations. Storage Engine Draining Check engine drain hose (lowest hose of engine). Make sure there is no sand or other particles in it and that it is not obstructed so that water can exit the engine. Clean hose and fitting as necessary.
smo2002-005a.book Page 14 Friday, September 7, 2001 11:34 AM CAUTION: Antifreeze mix must be fed in cooling system. Otherwise remaining water will freeze. This operation requires a good technical knowledge of the cooling system path. If antifreezing is not performed adequately engine/exhaust system may freeze and cause severe engine damage. We strongly recommend this operation be performed by an authorized SEA-DOO dealer.
smo2002-005a.book Page 15 Friday, September 7, 2001 11:34 AM Hose Disconnection Disconnect water INLET hose at engine between T-fitting and cylinder head fitting. 1 1 F18E0FY 1. Crankcase cooling cover outlet hose F18E0BY 1. Disconnect this side of the T-fitting Temporarily install a short piece of hose to replace the one removed. Antifreeze Insert a funnel into the temporary hose and pour antifreeze mix in engine until the colored solution appears at cooling system bleed outlet. 1 F18E08Y 1.
smo2002-005a.book Page 16 Friday, September 7, 2001 11:34 AM At this point, install a hose pincher on bleed outlet hose. F18E0EY 1 1. Bleed outlet hose Continue to pour until antifreeze flows in air compressor water outlet hose. F18E01Y 1 1. Air compressor water outlet hose Remove pinchers in this order to allow proper flow of antifreeze. 1. Bleed outlet hose. 2. Crankcase cooling cover outlet hose. 3. Engine cylinder drain hose. 4. Water outlet hose.
smo2002-005b.fm Page 17 Friday, October 12, 2001 10:19 AM SPECIFICATIONS GTX DI (5563/5564/5595/5596) ENGINE Rotax® 947, 2-stroke Engine type Induction type Reed valve Exhaust system Water cooled/water injected Exhaust valve Rotax Adjustable Variable Exhaust (RAVE) Type Lubrication Oil type Number of cylinders Oil injection BOMBARDIER Formula XP-S DI synthetic injection oil (or equivalent) 2 951.2 cm3 (58 in3) Displacement COOLING Open circuit.
smo2002-005b.
