Technical data

Section 05 COOLING SYSTEM
Sub-Section 01 (COMPONENTS)
05-01-7
1. Spring
2. Cover
7, Fitting
Remove fitting from valve housing.
1. Fitting
8, Tapered Needle
Unscrew the tapered needle.
NOTE : Hold the valve to prevent it from
turning.
1. Tapered needle
Remove the tapered needle from valve housing.
1. Remove tapered needle
9,10, Valve and Bellows
Pull the valve slightly. Using pliers, release the
clamp which retains the bellows.
Remove valve and bellows.
Inspection
Inspect parts for damage. Verify especially bel-
lows for cracks.
Assembly
Assembly is essentially the reverse of disassem-
bly procedures.
F01E1RA
1
2
F01E1SA
1
F01E1TA
1
F01E20A
1
www.SeaDooManuals.net