Technical data

Section 08 ELECTRICAL SYSTEM
Sub-Section 05 (INSTRUMENTS AND ACCESSORIES)
08-05-1
INSTRUMENTS AND ACCESSORIES 5
GENERAL
It is possible to activate the fuel gauge / low oil
warning light, multifunction gauge or VTS gauge
when the engine is not running.
Make sure the safety lanyard is removed, then de-
press the start / stop button.
The gauge(s) will be activated during 33 seconds
: the time the delay timer of the MPEM will stay
on.
INSPECTION
Fuel Gauge / Low Oil Warning Light
The fuel gauge has a pointer which indicates fuel
level in the tank.
The low oil warning light is part of the gauge. It
will light when injection oil level is low.
1. Low oil warning light
Multifunction Gauge
A LCD gauge indicates the amount of fuel in the
tank. Warning lights will indicate a defective
charging system, an overheating engine, low fuel
level and low oil level.
1. Fuel level bar graph
2. Engine overheats
3. Low oil level
4. Low fuel level
5. Low voltage
Accuracy of gauge can be checked with a potenti-
ometer.
– Disconnect 6-circuit tab housing of gauge.
– Using an appropriate terminal remover, remove
PINK / BLACK and PINK wires from tab hous-
ing.
1. Remove wires
2. Tab housing
3. PURPLE
4. BLACK
5. PINK
6. PINK / BLACK
7. BLUE
8. BLUE / BLACK
– Reconnect tab housing of gauge.
– Connect potentiometer test probes to PINK /
BLACK and PINK wires of gauge.
10
Bombardier
F01G07A
1
-
+
Bombardier
F01G0LA
1
2
5
3
4
A
B
C
D
E
F
1
3
4
5
6
7
8
2
F02H0CB
www.SeaDooManuals.net