Technical data

Section 09 PROPULSION SYSTEM
Sub-Section 01 (JET PUMP)
09-01-27
SPI and HX Models
Secure support of manual trim.
1. Torque nut to 10 N•m (89 lbf• in )
All Models
NOTE : Ball joint must be parallel. If not,
loosen jam nut and adjust ball joint. Torque
jam nut to 2.5 N•m (23 lbf•in).
Check steering alignment. Refer to STEERING
SYSTEM 10-04.
Slightly lubricate wear ring with BOMBARDIER
LUBE lubricant before starting to minimize friction
during initial start.
F05J08B
1
www.SeaDooManuals.net