Technical data

Section 10 STEERING SYSTEM
Sub-Section 03 (HX MODEL)
10-03-4
WARNING : Make sure integrated flat
keys of steering stem arm and support are
properly seated in steering stem keyways.
1. Keyway
2. Torque to 6 N•m (53 lbf•in)
3. Synthetic grease
4. Torque to 7 N•m (62 lbf•in)
5. Torque to 15 N•m (11 lbf•ft)
Apply the proper torque specifications as given in
the previous illustration or the main illustration at
the beginning of this sub-section.
WARNING : Correct torque must be strict-
ly followed.
4,5,6,7,8, Grip, Cap, Bolt, Flat Washer
and Grip Insert
When installing the grip insert, ensure that its
notch is properly inserted in the hole beneath the
handlebar.
1. Notch inserted in handlebar hole
Install grip on handlebar matching it to the U form
of the handlebar.
Apply Loctite 242 (blue) on bolt threads.
Install flat washer and bolt ; torque to 6 N•m (53
lbf•in).
1. Grip insert
2. Grip
3. Flat washer
4. Loctite 242 (blue)
5. Torque bolt to 6 N•m (53 lbf•in)
6. Cap
STEERING ALIGNMENT
For steering alignment procedure, refer to STEER-
ING SYSTEM 10-04.
;
2
F05K08A
4
1
5
3
;
F01K1RA
1
F01K1QA
1
2
3
4
5
6
www.SeaDooManuals.net