Technical data

Section 12 HULL / BODY
Sub-Section 01 (ADJUSTMENT AND REPAIR)
12-01-18
CAUTION : If you notice any clearance be-
tween plastic insert and aluminum insert,
fill gap with epoxy glue to obtain good adhe-
sion of aluminum insert.
1. Knurled surface
2. Inner bore
Install aluminum insert into plastic hull insert.
NOTE : Align aluminum insert as much as
possible with PTO flywheel.
1. Aluminum insert
NOTE : The epoxy glue curing time is 30
minutes.
-
F01L2VA
1
2
F01L2WA
1
www.SeaDooManuals.net