Technical data

Section 13 TECHNICAL DATA
Sub-Section 01 (SP AND SPI MODELS)
13-01-2
ELECTRICAL SP (5876) SPI ( 5878)
Magneto generator output 160 W @ 6000 RPM or 4.0 A @ 2000 RPM
Ignition system type CDI
Spark plug Make and type NGK BR7ES
Gap 0.5þ-þ0.6 mm (.020þ-þ.024 in)
Ignition timing mm (in) 2.41 (.095)
(BTDC) Degrees 20° ± 1 ➀
Generating coil 40 - 76 ❽
Battery charging coil .05 - .6
Ω
Ignition coil Primary Not applicable
Secondary 9 - 15 k
Ω
Engine rev limiter setting 6550 ± 50 RPM
Battery (Yuasa / Exide) 12 V, 19 A•h
Fuse Starting system 5 A
Charging system 15 A
ADDITIONAL INFORMATION : ➀Engine cold @ 6000 RPM.
CARBURETION SP (5876) SPI (5878)
Carburetor Type Mikuni BN-38 (diaphragm)
Quantity 1
Main jet 142.5 147.5
Pilot jet 65
Adjustment Low-speed screw 1-1/4 turn ± 1/4
High-speed screw 0
Idle speed (in water) 1500 RPM
Idle speed (out of water) 2400 RPM 2500 RPM
Fuel Type Regular unleaded gasoline
Minimum octane no. 87
Fuel return line orifice 0.8 mm
(.031 in)
ADDITIONAL INFORMATION :
COOLING SP (5876) SPI (5878)
Type Open circuit – Direct flow
from jet propulsion unit
Thermostat None
Monitoring beeper setting 96-99°C (205-210°F)
ADDITIONAL INFORMATION :
www.SeaDooManuals.net